Update Galaxy Note 4 N910S To Android 5.0.1 Lollipop [Official Firmware]
Galaxy Note 4 N910S has started receiving Android 5.0.1 Lollipop in South Korea. This happens to be the second variant of the Galaxy Note 4 N910C to receive the Android 5.0 update. The update has caught some major changes. First of all, there’s a new TouchWiz UI inspired by Google’s Material Design. New notifications Panel on the lock screen, enhanced device security and performance, stability and the battery performance has been improved to some extant.
The update was rolled out through OTA and via Samsung Kies at that moment. Users living outside South Korea can update to this firmware using Odin3 or else wait for the update to hit their regions, that sure is going to take pretty long. The firmware is SK Telecom branded, but we expect it to work fine on all the SM-N910S variants of the Galaxy Note 4. If you’re looking for a method to flash this firmware using Odin3, you may like to stay tuned with us for a while as we are about to install this official Android 5.0.1 Lollipop firmware on our beloved Galaxy Note 4 SM-N910S. Let’s go through firmware details and then flash the firmware right away.
Firmware Details:
- Model Number: SM-N910S
- Region: South Korea (SKC)
- Version: Android 5.0.1 Lollipop
- Build: N910SKSU1BOB4
Early Preparations
1. This guide is only for Galaxy Note 4 SM-N910S!
Make sure that your device is exactly as mentioned above. To check out what device you have, go to Settings > More/General > About Device or Settings > About Device and match the model number. Be careful about the device model number, flashing a file on a device not listed here might result in bricking it up. In that case, we may not be held responsible.
2. Battery should be charged at least 60%!
Your device’s battery should not be weak. In case your device goes dead during the flashing process, your device may get soft bricked and you might be in need of flashing stock firmware and that will ultimately result in wiping up your data as well. So, make sure that you charge your device before you start the flashing process.
3. Use the OEM data cable to establish connection!
Always use the original data cable to establish connection between your Android device and your computer / laptop. Using ordinary data cables might interrupt the flashing process, so to avoid any mishap, you need to meet this requirement as well.
4. Backup everything!
Just to be on the safe side, you may consider backing up each and everything from your Android device. This is highly recommended so that in case anything goes wrong, you still have the access to all of your data and you can restore it immediately. Also, clean install is always recommended, that means you will probably have to wipe your device to install the new firmware. So, you may backup everything as listed below.
Backup SMS Messages
Backup Call Logs
Backup Contacts
Backup Media – Copy your files manually to your PC or Laptop.
Backup EFS - If rooted, otherwise skip this step.
Backup Call Logs
Backup Contacts
Backup Media – Copy your files manually to your PC or Laptop.
Backup EFS - If rooted, otherwise skip this step.
5. Install Samsung USB drivers
In order to be able to establish connection between your PC and your Galaxy S4, you need to have the Samsung USB drivers installed on your PC. You can find all Android USB drivers here on our site.
6. Turn off Samsung Kies and other softwares while using Odin3!
Make sure that you turn off Samsung Kies while using Odin3 flashtool. Samsung Kies will interrupt Odin3 and will result in causing errors and may not let you flash your desired firwmrae. Also, make sure that you turn off any antivirus software you’ve installed and also disable firewall to avoid any connection and flashing issues.
Required Downloads & Installations
- Download and extract Odin3 v3.10.6.
- Download and extract firmware file to get the .tar.md5 file.
How To Install Official Android 5.0.1 Lollipop On Galaxy Note 4 SM-N910S
- Make sure that you read the instructions listed above carefully and you’re all set to go ahead now.
- Wipe your device complete in order to attain a neat installation. You may boot into the recovery mode and perform a factory data reset.
- Open Odin3.exe.
- Put your N910S Note 4 in download mode. To do so, turn it off and wait for 10 seconds. Turn it on by pressing and holding Volume Down + Home Button + Power Key simultaneously, You should see a warning, press Volume Up to continue. In case this method doesn’t work for you, try one from this guide.
- Connect your device to your PC.
- As soon as Odin detects your phone, the ID:COM box should turn blue. Make sure that you’ve installed Samsung USB drivers before connecting.
- For Odin 3.09 or 3.10.6 hit the AP tab. Select the firmware.tar.md5 or firmware.tar, that you downloaded and extracted above.
- If you’re using Odin 3.07, you will select “PDA” tab instead of the AP tab, rest of the options remain untouched.
- Make sure that the options selected in your Odin are exactly as shown in the pic.
- Hit start and wait till the firmware flashing is complete, as soon as your device restarts, remove it from PC.
- Wait for your device to reboot, as soon as it reboots check out the new firmware!
- Your device will be running on official Android 5.0.1 Lollipop firmware.
- Once updated, do not try to downgrade, or else you will result in messing up EFS partition of your device.
- That’s all!
Got any queries? Make sure that you drop em’ in the comment box below.
No comments:
Post a Comment